WhatsApp: +086-18620301269 E-mail:lixiangchao@testeck.com Tel: +086-18620301269 Chat Now

UL1180 cable Equipment Wire PTFE cable150℃ 200℃ 250℃ 300℃

Source manufacturers, first-hand source.UL1180 cable Equipment Wire PTFE cable150℃ 200℃ 250℃ 300℃

GET A QUOTE

UL1180 cable Characteristics:
1. Physical properties
a. Excellent mechanical properties:
Tensile strength ≥ 20.7MPa, elongation at break > 200%
After aging:
Condition: 260±1.0℃/96H
Residual rate of tensile strength > 85% Residual rate of elongation at break ≥ 85%
b. Flame retardancy: VW-1, vertical burning, 5 times, 15S each time, any residual flame is not more than 60S
c. Low temperature bending: -10℃±2℃/4H, the sample surface is qualified if there is no crack
2. UL1180 cable Electrical properties
a. Rated temperature: 200℃ Rated voltage: 300V
b. Spark test: No breakdown occurs when passing through the test electrode. Spark test voltage is 3000V
C. Dielectric withstand voltage: 2KV, no breakdown in 60 seconds
3. Processing performance
8. Applicable to all conventional wiring harness processing techniques
b. Please inform us if you have any special needs
4. Environmental protection
a. Comply with ROHS/REACH

UL1180 cable Application
General commercial electronics, electronic appliances and equipment internal connection wires
Reference standards:
UL758-2014, UL1581-2009
Overview:
Internally installed wires to prevent impact and sharp bends at high temperatures

model	Specification AWG	Conductor structure (pieces/mm) ±0.005mm	Conductor resistance 20℃ (Q/Km)	Conductor diameter (mm)	Insulation thickness (mm)		Finished outer diameter (mm)
model	Specification AWG	Conductor structure (pieces/mm) ±0.005mm	Conductor resistance 20℃ (Q/Km)	Conductor diameter (mm)	Average value	Minimum value	Average value	Tolerance
UL1180	10	37/0.42	3.54	2.94	0.35	0.30	3.64	±0.15
	12	37/0.374	5.64	2.62	0.35	0.30	3.32	±0.15
	12	19/0.50	5.64	2.50	0.35	0.30	3.20	±0.15
	14	19/0.361	8.96	1.82	0.35	0.30	2.52	±0.10
	16	19/0.287	14.60	1.44	0.33	0.30	2.10	±0.10
	18	7/0.39	23.20	1.19	0.33	0.30	1.85	±0.10
	18	19/0.235	23.20	1.18	0.33	0.30	1.84	±0.10
	20	19/0.19	36.70	0.95	0.33	0.30	1.60	±0.10
	22	7/0.254	59.40	0.76	0.33	0.30	1.40	±0.10
	22	19/0.15	59.40	0.76	0.33	0.30	1.40	±0.10
	24	7/0.20	94.20	0.61	0.33	0.30	1.26	±0.10
	24	19/0.12	94.20	0.61	0.33	0.30	1.26	±0.10
	26	19/0.10	150.00	0.50	0.33	0.30	1.15	±0.10
	26	7/0.16	150.00	0.48	0.33	0.30	1.15	±0.10
	28	7/0.127	227.00	0.38	0.33	0.30	1.05	±0.10
	28	1/0.32	227.00	0.32	0.33	0.30	0.98	±0.10
	30	7/0.10	381.00	0.30	0.33	0.30	0.96	±0.10

In addition to the above specifications, we can also customize other specifications you need. You are welcome to email TST CABLES engineers (Email: lixiangchao@testeck.com) to communicate your needs and get free samples.