TST CABLES offer 0.5mm and 1.0mm pitch flat flexible cables which perfectly compliments TSTCABLES Flat Flexible Cable FFC connector range. Cables are available in 4-80 conductors in 0.5mm pitch and 4-50 conductors in 1.0mm pitch. The 1.0mm pitch cables are available in a variety of thickness options.
Flat Flex cable is available in A type – Contacts same side or D Type – Contacts opposite sides. This allows for flat flex cable solutions to best fit your requirements, due to the intricate nature of folds and the orientation of the cable with designs.
Folding & Bending Types
Flat Flexible Cable can be folded into different shapes to save further space and enable them to fit perfectly into the equipment. Some are folded in such a way to navigate around intricate designs, where others can be shaped specifically with the view to be dropped straight inside a product. Here are the most common folding and bending types uses in the majority of devices today.
Shielding & Grounding
Shielding (grounding) is used to improve EMI (Electro Magnetic Interference) protection, which provides protection from external electrical noise.
Sometimes on a FFC cable alternative conductors are grounded & connected to the shield, so giving each of the other conductors (carrying electrical signals) protection from interfering with each other or from external electrical noise.
Product Description
Specifications:
Cable Type: A type( Same Side)
Model : AWM 20624 80C 60V VW-1
Pitch: 0.5mm²~2.5mm²
Pin Number: 9Pin
Width:5mm
Dielectric Strength: 60V
Heat Resistance: 80℃
Appliction of FFC cable:
Widely used in a variety of printers print head and the connection between the motherboard, plotters, scanners, copiers, stereos, LCD appliances, fax machines, DVD players and other products, a variety of signal transmission and panel connected.
Q: How does FFC flexible cable distinguish front and back?
A: If the gold fingers (or blue reinforcement plate) on both ends of the cable are on the same side, it is called the same direction line (or the same line); Faces are called reverse lines (or different lines)
Q:What tests have you done before leaving the factory?:
A: Before leaving the factory, we performed adhesion test, flexibility test, high temperature test, high voltage low resistance test.
Note: In addition to these specifications, TST CABLES can also customize other specifications of ffc cable you need.
This post is also available in: English