Urban rail transit power cables are “blood vessels”, which bear the functions of conveying electricity and transmitting signals, and are of many varieties and quantities. Cable quality directly affects the stability and safety of rail transit operation, once the cable failure, will lead to power interruption or signal transmission interruption failure, the vehicle operation has a significant impact. Therefore, locomotive power supply system power cable design selection is critical.
Railway locomotive power cable
The cables used in rail locomotives are required to be low-smoke (low) halogen-free, flame retardant, fire-resistant, oil-resistant, UV-resistant, moisture-resistant, waterproof, mildew-proof, rodent-resistant, and so on, and in the south, they are also required to be termite-resistant.
The cable products can meet the wear-resistant, high temperature, cold, tensile, bending, anti-rodent and ant, flame retardant, fire-resistant, UV resistance, radiation resistance, electromagnetic compatibility and other complex use of environmental requirements.
Cable features.
1, the use of copper / tinned copper core conductor, low resistivity, good electrical conductivity, excellent mechanical properties;
2, the use of cross-linked polyolefin/high-energy polymer insulation, and has excellent electrical properties, mechanical and physical properties and excellent waterproof performance;
3, the use of low-smoke halogen-free flame-retardant polyolefin materials as the outer sheath of the cable, with UV protection, flame retardant, non-toxic and low-smoke performance.
5、Products of environmental safety, high reliability and long service life.
TSTCABLES focus on cable applications and solutions in the field of rail transit, 11 years of experience in the field of rail transit, CRCC certification, with independent intellectual property rights of the key technologies, is the earlier localization and through the loading and operation of the assessment of the rail transit cable manufacturers, the production of locomotive power cables are widely acclaimed.
TSTCABLES locomotive power cables
TSTCABLES rail locomotive power cables (EN50382) are able to maintain their power transmission function under high temperature conditions, with special fireproof performance, which helps to improve the safety of transportation.
Cables with or without sheaths are insulated and sheathed with halogen-free silicone rubber materials. In case of fire, they prevent the spread of flames, reduce the emission of toxic gases and smoke, minimize the loss of visibility and enable the rapid evacuation of personnel in order to prevent damage to the railroad system caused by fire.
TSTCABLES cable characteristics
1、Cable AC rated voltage is 1.8/3kv, 3.6/6kv.
2、Cable operating temperature is -50℃-120℃ or 150℃.
3. Allowable bending radius of the cable: 6 times the outer diameter of the cable.
4、Anti-fire level: HL3 which is adequate to EN45545-2 R15/R16.
5. Toxicity index: Equivalent to the European standard toxicity index of no more than 3, equivalent to the iron standard toxicity index of no more than 5.
6, cable solvent resistance, acid and alkali resistance, can be used in mineral oil and fuel oil contaminated occasions.
TSTCABLES has been deeply engaged in the field of rail transportation for 11 years, and its products cover EN50264 series, EN50306 series, EN50382 series, reduced-thinning cables, data cables, sensor cables, crossover cables, high-temperature-resistant cables, high-cold cables, and so on.
They are applicable to the models of locomotives, high-speed railways, subways, urban railways and ordinary locomotives, etc. They are committed to promoting the continuous innovation of connection and transmission technologies and products in the field of rail transportation.
With the spirit of craftsmanship of excellence, TSTCABLES continuously creates professional and reliable cables as well as high-quality and sustainable solutions, winning the support and trust of many customers.